Optimizing the Mechanical Properties of Cement Composite Boards Reinforced with Cellulose Pulp and Bamboo Fibers for Building Applications in Low-Cost Housing Estates.

Africa is the third-richest continent in the world in terms of bamboo species. Despite these laudable natural resources, most African countries still use asbestos cement board as one of their major building materials. This is chiefly due to the high cost of equipment and technologies associated with non-asbestos-fiber cement board production. The current research seeks to underscore the possibility of utilizing these massive continent resources for non-asbestos-fiber cement board production by employing the existing production process in the asbestos cement industries via an innovatively developed laboratory-simulated Hatschek process. Non-asbestos-fiber cement boards incorporating kraft and bamboo fibers were successfully produced in the laboratory using this innovative method based on Hatschek technology, with natural fibre addition in the range of 2-6 wt.%. Experimental results revealed that the Flexural strength and deflection of the board improved significantly, producing optimum values of 10.41 MPa and 2.0 mm, respectively for composite board reinforced with 10 wt.% and 6 wt.% of kraft pulp and bamboo fibers, respectively. The SEM morphology of the fractured surfaces revealed the mode of composite fracture as well as good interaction at the fiber-matrix interface. Overall, the mechanical properties of the developed composite boards satisfy the minimum requirements of relevant standards based on fiber cement flat sheets and can be employed for internal building applications in low-cost housing estates in developing countries. The outcome of this research indicates that the current industrial production process based on Hatschek technology can be employed for non-asbestos-fiber cement board production using the studied natural fiber.

The presence of erionite in North American geologies and the estimated mesothelioma potency by region.

OBJECTIVE: Erionite is a naturally occurring fibrous mineral found in soils in some geographical regions. Known for its potency for causing mesothelioma in the Cappadocia region of Turkey, the erionite fiber has attracted interest in the United States due to its presence in a band of rock that extends from Mexico to Montana. There are few toxicology studies of erionite, but all show it to have unusually high chronic toxicity. Despite its high potency compared to asbestos fibers, erionite has no occupational or environmental exposure limits. This paper takes what has been learned about the chemical and physical characteristics of the various forms of asbestos (chrysotile, amosite, anthophyllite, and crocidolite) and predicts the potency of North American erionite fibers. MATERIALS AND METHODS: Based on the fiber potency model in Korchevskiy et al. (2019) and the available published information on erionite, the estimated mesothelioma potency factors (the proportion of mesothelioma mortality per unit cumulative exposure (f/cc-year)) for erionites in the western United States were determined. RESULTS AND DISCUSSION: The model predicted potency factors ranged from 0.19 to 11.25 (average ∼3.5), depending on the region. For reference, crocidolite (the most potent commercial form of asbestos) is assigned a potency factor ∼0.5. CONCLUSION: The model predicted mesothelioma potency of Turkish erionite (4.53) falls in this same range of potencies as erionite found in North America. Although it can vary by region, a reasonable ratio of average mesothelioma potency based on this model is 3,000:500:100:1 comparing North American erionite, crocidolite, amosite, and chrysotile (from most potent to least potent).

Plants, Microorganisms and Their Metabolites in Supporting Asbestos Detoxification-A Biological Perspective in Asbestos Treatment.

Many countries banned asbestos due to its toxicity, but considering its colossal use, especially in the 1960s and 1970s, disposing of waste containing asbestos is the current problem. Today, many asbestos disposal technologies are known, but they usually involve colossal investment and operating expenses, and the end- and by-products of these methods negatively impact the environment. This paper identifies a unique modern direction in detoxifying asbestos minerals, which involves using microorganisms and plants and their metabolites. The work comprehensively focuses on the interactions between asbestos and plants, bacteria and fungi, including lichens and, for the first time, yeast. Biological treatment is a prospect for in situ land reclamation and under industrial conditions, which can be a viable alternative to landfilling and an environmentally friendly substitute or supplement to thermal, mechanical, and chemical methods, often characterized by high cost intensity. Plant and microbial metabolism products are part of the green chemistry trend, a central strategic pillar of global industrial and environmental development.

A critique of Occupational Safety and Health Administration's halfmask respirator assigned protection factor.

Halfmask air-purifying respirators are used by millions of workers to reduce inhaling air contaminants, both chemical (e.g., asbestos, styrene) and biological (e.g., SARS-CoV-2, Mycobacterium tuberculosis). In 2006, the federal Occupational Safety and Health Administration (OSHA) promulgated a standard that gave halfmask respirators an assigned protection factor (APF) of 10. This signified that OSHA assumes a fit-tested and trained wearer will experience a 10% maximum total inward leakage of contaminated air into the facepiece. To derive APF = 10, OSHA analyzed data from 16 workplace studies of the efficacy of halfmask respirators worn against particulate contaminants. In this commentary, I contend that, in considering the data, OSHA made several errors that overstated halfmask respirator efficacy. The errors were (i) failing to properly account for within-wearer and between-wearer variability in respirator efficacy; (ii) ignoring the effect of particle deposition in the respiratory tract; (iii) aggregating unbalanced data within and between studies, and effectively double-counting the data in some studies; and (iv) ignoring the effect that particle size exerts in penetrating respirator facepiece leak paths. The net result is that OSHA's APF = 10 can lead to excessive toxicant exposure for many workers.

Toxicity and inflammatory potential of mineral fibres: The contribute of released soluble metals versus cell contact direct effects.

Asbestos fibres have been considered an environmental hazard for decades. However, little is known about the attempts of circulating immune cells to counteract their toxicity. We addressed the early effects of fibre-released soluble factors (i.e. heavy metals) in naïve immune cells, circulating immediately below the alveolar/endothelial cell layer. By comparison, the direct fibre effects on endotheliocytes were also studied since these cells are known to sustain inflammatory processes. The three mineral fibres analysed showed that mainly chrysotile (CHR) and erionite (ERI) were able to release toxic metals in extracellular media respect to crocidolite (CRO), during the first 24 h. Nevertheless, all three fibres were able to induce oxidative stress and genotoxic damage in indirectly challenged naïve THP-1 monocytes (separated by a membrane). Conversely, only CHR-released metal ions induced apoptosis, NF-κB activation, cytokines and CD163 gene overexpression, indicating a differentiation towards the M0 macrophage phenotype. On the other hand, all three mineral fibres in direct contact with HECV endothelial cells showed cytotoxic, genotoxic and apoptotic effects, cytokines and ICAM-I overexpression, indicating the ability of these cells to promote an inflammatory environment in the lung independently from the type of inhaled fibre. Our study highlights the different cellular responses to mineral fibres resulting from both the nature of the cells and their function, but also from the chemical-physical characteristics of the fibres. In conclusion, CHR represented the main pro-inflammatory trigger, able to recruit and activate circulating naïve monocytes, through its released metals, already in the first 24 h after inhalation.

Occupational exposures to asbestos in the steel industry: An analysis of the AISI sampling campaign (1989-1997).

The American Iron and Steel Institute (AISI) gathered data between 1989 and 1997 to build an "objective database" to further understand the occupational exposures generated by the few asbestos-containing materials remaining at various steelmaking companies at this time. This paper analyzed the 520 samples from this campaign which occurred at five different steel manufacturers: Georgetown Steel Company, Inland Steel Company, Ling-Temco-Vought (LTV) Corporation, United States Steel Corporation, and Weirton Steel Corporation. This database is believed to have never previously been systematically organized. Samples were grouped based on sampling times to determine whether they should most appropriately be compared to the OSHA short-term excursion limit (EL) or the 8-hr time-weighted average (TWA) permissible exposure limit (PEL). Sampling times of 30 min or less were considered short-term samples, and samples of 180 min or greater were considered representative workday samples. Samples that did not fit into either category, with sampling times between 31 and 179 min, were considered task samples. Overall, the data indicated that the airborne concentrations were quite low in 1989 and they continued to be low through the study period which ended in 1997. Only seven out of 286 (approximately 2.5%) short-term or representative workday samples were in exceedance of the current OSHA OELs that were implemented in 1994 (short-term samples being compared to the 1 f/cc EL and representative workday samples being compared to the 0.1 f/cc 8-hr TWA PEL). Consistent with prior data, analysis of this dataset supports the view that materials containing asbestos were not used in many applications in the steel industry, and measured airborne concentrations of asbestos were almost always below the occupational exposure limits (OELs) in the post-OSHA era (1972-2000).

Asbestos Exposure and Ovarian Cancer: A Meta-analysis.

Background: The International Agency for Research on Cancer (IARC) Monograph conducted a systematic review of the relationship between asbestos and ovarian cancer. However, there may have been information bias due to the undue weight given to few articles. To address this limitation, the present study performed a meta-analysis integrating studies published both before and after the 2012 IARC Monograph on Asbestos, with the aim of investigating the association between asbestos exposure and ovarian cancer. Methods: A comprehensive search of major journal databases was conducted to identify studies examining the relationship between asbestos exposure and ovarian cancer, including those featured in the 2012 IARC Monograph on Asbestos. A meta-analysis on asbestos exposure and cancer risk was performed. Results: The meta-analysis of studies published after the 2012 IARC Monograph on Asbestos found a summary Standardized Mortality Ratio (SMR) of 2.04 (95% CI: 1.03-4.05; p = 0.0123; 5 studies), with a significant degree of heterogeneity among the studies (I2 = 72.99%). The combined analysis of 15 studies before and after the 2012 IARC Monograph showed an overall summary SMR of 1.72 (95% CI: 1.43-2.06; p = 0.0349; 15 studies), with a moderate degree of heterogeneity (I2 = 42.99%). Conclusion: This meta-analysis provides evidence of a significant association between asbestos exposure and ovarian cancer mortality. While the possibility of misdiagnosis in earlier studies cannot be completely ruled out, recent findings suggest a robust correlation between asbestos exposure and ovarian cancer. This highlights the importance of sustained efforts to minimize asbestos exposure and protect public health.

Lung fibre burden and risk of malignant mesothelioma in shipyard workers: a necropsy-based case-control study.

OBJECTIVES: In Italy, the highest pleural cancer mortality and incidence have been observed among Italian regions where the 2 largest Italian shipyards were (and are) located. The objective of this study was to assess the exposure-response relationship for mesothelioma among male workers employed in the Monfalcone, Italy, shipyard. METHODS: We conducted a necropsy-based case-control study. Cases (N = 102) were mesothelioma decedents and controls were those with lung cancer (N = 84). Complete job histories were available; the lung fibre content was measured using a scanning electron microscope with X-ray fluorescence, after sample preparation according to the European Respiratory Society guidelines. Odds ratios and 95% confidence intervals of mesothelioma by fibre type and lung fibre burden, as a categorical or continuous variable, were assessed by unconditional logistic regression, adjusted for age and time since exposure cessation. Analyses for the amphibole and chrysotile lung fibre burden were mutually adjusted. We calculated a cumulative exposure index by applying a job-exposure matrix to the job histories of study cases and assessed its correlation with the lung fibre burden. RESULTS: We found an odds ratio of 22.0 (confidence intervals 5.66-85.7) for the highest lung fibre burden category (mean 43.8 million total asbestos fibres per gram of dry tissue) compared with the reference (mean 0.48). Using log10-transformed lung fibre burden, we found that the odds ratio was 3.71 (confidence intervals 2.03-6.79) for a 10-fold lung fibre burden increase. Results for the amphibole lung fibre burden were similar. Odds ratios increased over chrysotile lung fibre burden categories (P-trend = 0.025), and the odds ratio for a 10-fold increase was 4.73 (confidence intervals 0.32-70.4). CONCLUSIONS: The cumulative exposure index was correlated with total and amphibole lung fibre burden, but not with chrysotile lung fibre burden. Mesothelioma risk was proportional to total, amphibole, and chrysotile lung fibre burden in shipyard workers.

Spindle Cell Malignancy and Asbestos Exposure: A Case Report.

We outline the presentation of a 68-year-old woman who received a chest radiograph due to her insurance requirements, resulting in the discovery of a left-sided pleural effusion. The effusion was further characterized as loculated on subsequent imaging. Thoracentesis yielded exudative fluid, leading to the patient undergoing video-assisted thoracoscopic surgery (VATS). During this procedure, a cystic mass was visualized, with the conversion of the operation to an open thoracotomy and left lower lobe lobectomy. Pathology was positive for spindle cell sarcoma. A thorough history of the patient revealed a decades-long occupational exposure to asbestos. The significance of this report is to illustrate the clinical presentation, immunohistochemical characteristics, and management of a rare spindle cell malignancy. Our case also raises the importance of screening patients on an individualized, shared decision-making basis.

[Survival analysis of 37 cases of malignant mesothelioma].

Objective: To explore the relationship between clinicopathological features, treatment and prognosis of patients with malignant mesothelioma, and provide theoretical basis for the prevention and treatment of malignant mesothelioma. Methods: In November 2022, the clinical data of 37 patients with malignant mesothelioma diagnosed in Qingdao Central Hospital from July 2014 to November 2022 were retrospectively analyzed, and the prognostic factors were analyzed by Kaplan-Meier and log-rank tests. Results: The median age of the 37 patients was 66 years old, all patients were confirmed by pathology. The median survival time of all patients was 30.00 months. The 1-year, 2-year, 3-year and 5-year cumulative survival rates were 70.27% (26/37), 48.65% (18/37), 16.22% (6/37) and 13.51% (5/37), respectively. Compared with different treatments, the median survival time of palliative care patients was 5.00 months, which was significantly lower than that of operation group (30.33 months), chemotherapy group (30.00 months), surgery combined with chemotherapy group (30.00 months) and chemotherapy combined with bevacizumab targeted therapy group (47.42 months) (P<0.05). Gender, age (≥60 years old or <60 years old), smoking history, occupational exposure history, disease site, and surgical history were not factors affecting the survival of malignant mesothelioma patients (P>0.05) . Conclusion: The clinical symptoms of malignant mesothelioma are not specific, but early initiation of treatment can still prolong survival, and chemotherapy combined with anti-vascular targeted therapy shows better therapeutic effect.

[Research progress on pathogenesis of malignant mesothelioma].

The occurrence of malignant mesothelioma is related to exposure of asbestos. And many researchers have conducted in-depth analysis of the molecular changes of mesothelioma, showed that its molecular characteristics were chromosome changes, including chromosome rearrangement, gene mutation and gene deletion. Recent studies have strengthened our understanding of molecular characterization of mesothelioma, such as targeted mutations of tumor suppressor genes, differential gene expression, changes of miRNA and signal pathways. It is of great significance for the early diagnosis, clinical treatment and prognosis of malignant mesothelioma to explore the pathogenesis and development of malignant mesothelioma. This article reviews the research progress on the pathogenesis and carcinogenesis-related molecules of malignant mesothelioma.

Determination of asbestos cement rooftop surface composition using regression analysis and hyper-spectral reflectance data in the visible and near-infrared ranges.

The effects of asbestos on human health have spurred numerous studies examining its risks in urban environments. Recent works have shifted towards less-invasive techniques for remote detection and classification of asbestos-cement. In this context, this study combines visible (VIS) and near-infrared (NIR) reflectance data collected in-situ with reference signals from the USGS spectral library, utilizing optimized regression analysis to determine the surface composition of corrugated asbestos-cement rooftops. An outlier filter was successfully implemented to enhance the accuracy of regression calculations, achieving a high level of agreement with actual field observations. The regression analysis revealed varying proportions of weathered cement, hazardous asbestos fibers (specifically chrysotile and cummingtonite), and biological growth (such as lichens and moss). These results are consistent with previous research on the composition of asbestos-cement rooftops, including a comparable field study and XRD analysis conducted in 2019. This underscores the importance of using regression analysis, preceded by an outlier filtering step, on VIS and NIR reflectance data to ascertain the surface composition of asbestos-cement rooftops. This methodology holds potential for application to larger hyperspectral datasets across more extensive sample surfaces and areas.

Classification of asbestos and their nonasbestiform analogues using FTIR and multivariate data analysis.

This study presents a possible application of Fourier transform infrared (FTIR) spectrometry and multivariate data analysis, principal component analysis (PCA), and partial least squares-discriminant analysis (PLS-DA) for classifying asbestos and their nonasbestiform analogues. The objectives of the study are: 1) to classify six regulated asbestos types and 2) to classify between asbestos types and their nonasbestiform analogues. The respirable fraction of six regulated asbestos types and their nonasbestiform analogues were prepared in potassium bromide pellets and collected on polyvinyl chloride membrane filters for FTIR measurement. Both PCA and PLS-DA classified asbestos types and their nonasbestiform analogues on the score plots showed a very distinct clustering of samples between the serpentine (chrysotile) and amphibole groups. The PLS-DA model provided ∼95% correct prediction with a single asbestos type in the sample, although it did not provide all correct predictions for all the challenge samples due to their inherent complexity and the limited sample number. Further studies are necessary for a better prediction level in real samples and standardization of sampling and analysis procedures.

Asbestos in organochlorine insecticide powder sprinkled between pages of antiquarian books in a library in Japan.

Librarians at a university had planned to check the collection prior to the library renovations that began in 2015. They had previous knowledge of the presence of a light greyish-white powder with an unpleasant odour (hereinafter referred to as 'powder') sprinkled between the pages of antiquarian books in the library archive. The purpose of this study was to identify this powder with the help of experts from both inside and outside the university. The powder was qualitatively analysed using gas chromatography with mass spectrometry after hexane extraction. The powder was examined under a polarised light microscope and a field-emission scanning electron microscope equipped with an energy-dispersive X-ray spectrometer. Benzene hexachloride (BHC) was detected in the powder. Talc was the most abundant particle in the powder. The powder also contained 0.52 wt% asbestos, which belonged to the tremolite-actinolite series. No other types of asbestos were detected. The powder was presumed to be a bulking agent for BHC, and its major constituent was talc. This is the first report on asbestos-containing insecticides.

Recycling thermally deactivated asbestos cement in mortar: A possible route towards a rapid conclusion of the "asbestos problem".

The "asbestos problem" arises from the fact that asbestos is still abundant in many buildings and represents a hazard for human health. Current strategies adopted by law aiming at mitigating this hazard are far from being ideal. A smarter solution would be an energy sustainable detoxification treatment followed by recycling. If adopted, it would preserve the environment from pollution, natural resources from depletion and human health from hazard. Asbestos-cement slates were thermally deactivated through a sustainable process and reused in mortar for plaster applications. We found that the addition up to 7 wt% of the deactivated product does not affect significantly the water demand; does not affect thixotropy, stickiness and spreadability of the plastic mixture; slightly increases the strength of the mortar; does not compromise mechanical properties after aging. Considering the huge amount of traditional mortar employed worldwide, a rapid end of the "asbestos problem" is envisaged.

Rapid fiber-detection technique by artificial intelligence in phase-contrast microscope images of simulated atmospheric samples.

Since the manufacture, import, and use of asbestos products have been completely abolished in Japan, the main cause of asbestos emissions into the atmosphere is the demolition and removal of buildings built with asbestos-containing materials. To detect and correct asbestos emissions from inappropriate demolition and removal operations at an early stage, a rapid method to measure atmospheric asbestos fibers is required. The current rapid measurement method is a combination of short-term atmospheric sampling and phase-contrast microscopy counting. However, visual counting takes a considerable amount of time and is not sufficiently fast. Using artificial intelligence (AI) to analyze microscope images to detect fibers may greatly reduce the time required for counting. Therefore, in this study, we investigated the use of AI image analysis for detecting fibers in phase-contrast microscope images. A series of simulated atmospheric samples prepared from standard samples of amosite and chrysotile were observed using a phase-contrast microscope. Images were captured, and training datasets were created from the counting results of expert analysts. We adopted 2 types of AI models-an instance segmentation model, namely the mask region-based convolutional neural network (Mask R-CNN), and a semantic segmentation model, namely the multi-level aggregation network (MA-Net)-that were trained to detect asbestos fibers. The accuracy of fiber detection achieved with the Mask R-CNN model was 57% for recall and 46% for precision, whereas the accuracy achieved with the MA-Net model was 95% for recall and 91% for precision. Therefore, satisfactory results were obtained with the MA-Net model. The time required for fiber detection was less than 1 s per image in both AI models, which was faster than the time required for counting by an expert analyst.

Pleural mesothelioma (PMe): The evolving molecular knowledge of a rare and aggressive cancer.

Mesothelioma is a type of late-onset cancer that develops in cells covering the outer surface of organs. Although it can affect the peritoneum, heart, or testicles, it mainly targets the lining of the lungs, making pleural mesothelioma (PMe) the most common and widely studied mesothelioma type. PMe is caused by exposure to fibres of asbestos, which when inhaled leads to inflammation and scarring of the pleura. Despite the ban on asbestos by most Western countries, the incidence of PMe is on the rise, also facilitated by a lack of specific symptomatology and diagnostic methods. Therapeutic options are also limited to mainly palliative care, making this disease untreatable. Here we present an overview of biological aspects underlying PMe by listing genetic and molecular mechanisms behind its onset, aggressive nature, and fast-paced progression. To this end, we report on the role of deubiquitinase BRCA1-associated protein-1 (BAP1), a tumour suppressor gene with a widely acknowledged role in the corrupted signalling and metabolism of PMe. This review aims to enhance our understanding of this devastating malignancy and propel efforts for its investigation.

Global, regional, and national burden of non-communicable diseases attributable to occupational asbestos exposure 1990-2019 and prediction to 2035: worsening or improving?

Understanding the burden associated with occupational asbestos exposure on a global and regional scale is necessary to implement coordinated prevention and control strategies. By the GBD Study 2019, we conducted a comprehensive assessment of the non-communicable diseases burden attributable to occupational asbestos exposure. In 2019, 239,330 deaths and 4,189,000 disability-adjusted life years (DALYs) worldwide due to occupational asbestos exposure occurred. 1990-2019, deaths and DALYs attributed to occupational asbestos exposure increased by 65.65% and 43.66%, respectively. Age-standardized mortality rate (ASMR) and age-standardized DALYs rate (ASDR) decreased, with the most rapid declines in high Socio-Demographic Index (SDI) regions, with average annual percent change (AAPC) of - 1.05(95%CI: -1.2, -0.89) and -1.53(95%CI: -1.71, -1.36), respectively. Lung cancer, mesothelioma and ovarian cancer were the top three contributors to the increase in deaths and DALYs, accounting for more than 96%. AAPCs of ASMR and ASDR were positively associated with SDI. Global deaths from occupational asbestos exposure were predicted to increase and ASMR to decrease by 2035, mostly in males. Due consideration should be given to the susceptibility of the elderly, the lag of asbestos onset, and the regional differences, and constantly improve the prevention and control measures of occupational asbestos exposure and related diseases.

Successful treatment of simultaneous malignant pleural mesothelioma and pulmonary adenocarcinoma: A case report.

The present report described the case of a 74-year-old male patient with asbestos exposure whose chest computed tomography revealed a right lower lobe nodule and right pleural effusion. Pleural biopsy led to the diagnosis of epithelial malignant pleural mesothelioma (cT2N0M0, stage IB). Combination therapy with cisplatin + pemetrexed led to the complete remission of malignant pleural mesothelioma; however, the right lower lobe nodule grew in size over time. The patient was subsequently diagnosed with lung adenocarcinoma (cT1aN0M0, stage IA1) by computed tomography-guided biopsy performed 18 months after chemotherapy initiation and achieved remission of lung adenocarcinoma with stereotactic radiotherapy. The patient was alive without recurrence at the 12-month follow-up. The present case illustrated that multiple active regimens are currently available for malignant pleural mesothelioma and lung cancer that can aid in the treatment of complex cases.